Industrial &
Hydraulic Hose

Jason Industrial offers brass ball valves in a variety of sizes and utilizes Polytetrafluoroethylene (PTFE) ball seat material.

Made from cast brass with satin finish, Jason by Megadyne's straight stream brass nozzles in all sizes for use at 100 PSI.

Jason Industrial wrenches are ductile iron painted red, complete with a pry bar end and gas cock shut off/on feature.

Jason Industrial banding coils are made with clear FDA PVC, 3098 and can be used on any thermoplastic cover compound.

Standard mini ball valves are made of brass and have a working pressure of up to 150 PSI.

Each valve has a built in strainer that prevents debris from entering during operation. All sizes have NPS threads and complete valves are painted red.

These nozzles allow for straight stream or fog spray pattern in industrial, utility or commercial use.

Made from ductile iron with easy grip handle, contour head to fit the coupling curve and special round hole to engage the pin lug.

A complete tool for the fire hydrant operation.

Used on the submersed end of suction hose to prevent debris from entering the pump during operation.

For industrial utility and fire department applications, these adapters allow easy connections from hydrant to smaller size hose.

Banding sleeves are made to thread over the outside of Jason thermoplastic petroleum hoses to allow better coupling securing surface on the O.D. of the hose.

All Cam & Groove Fittings are Aluminum. Learn more.

Aluminum body features are lightweight, rigid and have high tensile strength.

Threaded couplings for suction or discharge of water or other fluids.

Used to connect air lines from compressors or other air source to all types of pneumatic tools and equipment.

Jason Industrial's Air Couplers are made of brass and offer a maximum inlet pressure of 300 PSI.

An all-purpose coupling, the female ground joint consists of a Male Stem, Wing Nut and Female Spud.

There are three active sandblast system couplings: Hose Ends, Nozzle Holders, and the Threaded Pot End. All three are available in aluminum or brass. Hose ends are also available in Iron.

Jason Industrial's Locking Lever Pump Couplings feature quick and easy connections, interchangeability, and more.

Jason offers our 12 Series couplings in a very broad range of sizes and connector options for use on Jason hydraulic hoses with either one or two wire braids of reinforcement in sizes from 04 through 32.

Jason’s 40 Series couplings extend the same features and benefits of the 12-Series but are designed to work with Jason’s 4 spiral 100R12 hoses in size 06 through 32.

Jason’s 60 Series couplings are designed for Jason’s 4 and 6 spiral extreme pressure hoses.

Cutting Capacity: 1-1/4" 4SP

Cutting Capacity: 2" 2 Wire

Cutting Capacity: 2" 6SP